Platform Structure Designed in Staad Pro
Posts
Vise Clamp
To Download the Model In IGS format Click the Below Ink. https://www.dropbox.com/s/v5tkudv6ursxnvh/asm0001_asm.igs?dl=0
Mechanical Component Design Using PTC Creo..
Designed in PTC Creo, If any body Need The model You Can use the Below Link in igs format https://www.dropbox.com/s/28g7aqer5tqpx69/asm0003_asm.igs?dl=0
Sample Stress Analysis Report
1. Foreword Purposes of the strength analysis for 16 ton Carriage & Girder have adequate strength to support to lift 32ton load, This analysis is carried out using ANSYS Workbench 15 Static Structural program, Material used for analysis is ASTM 36 with min Yield Strength 235 N/mm 2 2. Rules and Reference, a. BS 2573-1: 1983Rules for the design of cranes b. AISC 13 th Edition c. Standard Engineering Calculation 3. Structural Detail Please Refer DEMAG DWG No : DCA-71429-S : ZKBF-B3-1003 4. Load Calculation The entire load and safety factor calculated regarding BS 2573-1: 1983 Load Detail 3.1.2.2 Crane in use with in-service wind(BS 2573-1-1985) Load: L 1 +L 3 +H 1 +V 1 Calculation: SWL: 320000 N